FS type FRP chemical pump

General

This pump series is a cantilever-type horizontal single-stage-single-suction centrifugal pump. Its flow contact parts a-re made of steel-lined polyethylene with ultra-high molecular weight(UHMWPE). The material is a new corrosion-and-abrasion-resistant engineering plastic for the use of pump in the world. Its unique features are good resistance to abr-asion, good resistance to shock(specially for low temperature shock), resistance to creep deformation(resistance to crack resulted from ambient stress). and excellent resistance to corrosion.
The pump is of remarkable characteristics: multifunction, i.e. The pump is suitable for many working conditions. For example, it can be used in conveying acid and alkali clear liquids of slurry. varieties of corrosive mine slurries of meta-llurgical industry, varieties of thin acids of sulfuric acid industry, varieties of waste water of environment protection in-dustry, etc. Because of the resistance to corrosion and abrasion, it is widely used.

Brief introduction to main technical properties

1. Model:FUB series
2. Characteristics: resistance to corrosion and abrasion, one pump for multiple uses, suitable for acid and alkali clear liquids or slurries.
3. Structure: (1)the pump body is made of with poly-thene with ultra-high molecular weight.Embedded pieces of steel reinforcement, Over-current components up to 20-40mm thick, wear and tear to extend the effective life. And easy sol-ution to the steel liner of plastic off phenomenon.
(2) The blade wheel has two types: open type and closed type. It can be optionally chosen according to conditions of media.
(3) Seal:K-type dynamic seal.
4. Applicable media:sulfuric acid with concentration of less than 80%, nitric acid with concentration of less than 50%, hydrochloric acid with various concentration, liquid alkali, etc. It is used not only for clear liquid, but also for slurry.
5.Main technical data:working temperature: -20ºC -80ºC (for special requirements and improved materials, the temp-erature can be up to 105). Inlet diameter:Ø32mm-Ø250mm.Flow:5-600m3/h.Lift: not more than 50m.

Performance parameters of the table

Denor Fluid Equipment (Wuhan) Co., Ltd. is a reputable manufacturer and supplier of fluid equipment for water systems. The company has incorporated advanced fluid production technology and processes from Germany. Since its establishment, Denor has upheld its core values of morality, integrity, and mutually beneficial development. The company places great emphasis on branding and integrity, and has made significant contributions to the water supply and drainage industry.

Denor has obtained various certifications, including ISO9001 for quality management, OHSAS18001 for occupational health and safety management, and ISO14001 for environmental management. The company offers a wide range of products, such as prefabricated pumping stations, integrated water treatment pump stations, sewage lifting equipment, oil and water separators, smash type grilles, and no negative pressure complete sets of water supply equipment.

With over 50 patents, Denor was recognized as a national high-tech enterprise in 2018. Denor takes great care in every aspect of product production to ensure the optimal performance of its equipment. The company is committed to providing high-quality products and excellent after-sales service to meet customer needs and provide comprehensive solutions for water systems. Denor is dedicated to producing responsible products and being a socially responsible enterprise.